Discussion:
Installation to Dell PowerEdge T110
(too old to reply)
Yuri Dario
2010-05-24 10:12:34 UTC
Permalink
Hi,

I have a fresh installation to a dell server (T110), that is unable to
boot at all. I even don't see the boot logo for pressing alt-f1/f2.

I moved the disc to another dell (SC400), and the partition can boot
fine.

This T110 has a Core I3 intel cpu, I tried also to disable cores, VTx
and other things in bios, no go.

Even a standard boot cd (created with bootable) does not start.

Any ideas about what can I do?

thanks,
--
Bye,

Yuri Dario

/*
* OS/2 open source software
* http://web.os2power.com/yuri
* http://www.netlabs.org
*/
Andreas Kohl
2010-05-24 11:50:40 UTC
Permalink
Hello,
Post by Yuri Dario
I have a fresh installation to a dell server (T110), that is unable to
boot at all. I even don't see the boot logo for pressing alt-f1/f2.
For the installation, the SATA Controller was set to ATA Mode in the
Dell BIOS?
Post by Yuri Dario
I moved the disc to another dell (SC400), and the partition can boot
fine.
This T110 has a Core I3 intel cpu, I tried also to disable cores, VTx
and other things in bios, no go.
Strange, usually T110 have Intel Xeon 3400 processors.

--
Andreas
Yuri Dario
2010-05-24 12:39:56 UTC
Permalink
Hi,
Post by Andreas Kohl
For the installation, the SATA Controller was set to ATA Mode in the
Dell BIOS?
yes, already changed.
Post by Andreas Kohl
Strange, usually T110 have Intel Xeon 3400 processors.
this is a cheap edition :-)
--
Bye,

Yuri Dario

/*
* OS/2 open source software
* http://web.os2power.com/yuri
* http://www.netlabs.org
*/
Loading...